Zhangjiagang Filterk Filtration Equipment Co., Ltd.

TYPE PTJ-160 Plastic track sprayer machine

TYPE PTJ-160 Plastic track sprayer machine
Product Detailed

Mechanical parameters
Dimensions (L W H): 1100mm 2660mm 800mm

 PTJ-120 Spray Machine
Main technical parameters
Hopper capacity 120L displacement 1m ³ / min
Spray output 12-15 kg / min Machine weight 450KG
Power 10KW Dimension 2660 × 800 × 1100mm
Air pressure 1Mpa

 A .spraying machine works:
 Plastic space spraying machine for spraying indoor and outdoor venues elastic surface layer of plastic designed. It uses a feed pump for the liquid and solid particles of plastic mixture pumped into the spray gun, while the output from an air compressor compressed air also entered the gun in the spray mix, and a mixture of atomized spray in plastics the surface of a long space.
B.The main structure and function
1, the air compressor: The small size, broad-minded, low pressure drop, compact structure, operation stable and reliable and can provide the stability required for spraying gas source.
2,Hopper: Steel welded structure, anti-rust paint will be evenly mixed solid-liquid two-phase plastic stored in the hopper, and hopper was constantly stirring, transported to the feed pump.
 3, feed pump: feed pump for the displacement pump can transfer liquid and solid two-phase mixture flow with the speed changes. Variable speed motor drive by the stirring screw through the realization of stepless speed regulation may apply.

4, chassis: Steel welded structure, anti-rust paint. The chassis is equipped with two pairs of rubber tire, a pair of fixed wheels, a pair of steering wheels, the chassis is equipped with air compressors, hoppers, variable speed motors, pumps and other materials through the handle can be flexible movement and steering.
 5,Gun: gun can be achieved solid-liquid two-phase mixture of plastic and compressed air, atomization, and its evenly sprayed on the surface of plastic.

 ,Open operating procedures:
 Boot: 1, connected to power, the power plug access to 380V power supply line.
  2, air compressor operation: First check the power supply is in normal state, and then test machine, in order to jog checks for air compressors and variable speed motors whether it is transferred.
 Note: Air compressor pulley on the arrow marks a positive turn.
 3, confirmed that is transferred after the compound by adding solid-liquid two-phase mixture of plastic.        4, by air compressor start button, open the small air compressor air valve, and then spray the air valve to open, to the normal jet.  
        5, open the spray valve, open the variable speed motor, open the feed pump button to begin work, so they turned their guns by the material transported to the air exhaled. Note: The CVT motor hand wheel only at work, regulation, does not work, can not be adjusted so as to avoid damage to change gear. Note: The adjustable rotational speed per minute, 80 ~ 200 rpm. In the spraying, they turned their guns can adjust the size of air flow, according to on-site construction process requirements, regulation mist and linear, to achieve the desired result.

Shutdown: First off feed pump variable speed motors, and then they turned their guns off the air valve (to prevent the rinsing of the material into the air pipes to the air compressor so as to avoid damage to the air compressor grinding), and then off the air compressor, and then off air compressor air-sprayed on the valve wheel to the shutdown state. Methanol can be used cleaning solvent into the hopper, close the air valve turned their guns, and air compressors small ball valve, open the variable speed motor, feed pump for normal operation.
Check: In the pre-boot sure to check the air compressor oil, and variable speed motor is in normal position. Note: Oil the subject of the centerline as the standard oil level, below the centerline of the oil should be added to the appropriate standard oil.



Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.